- #LINUX UVC CAMERA CONTROL SERIAL NUMBER#
- #LINUX UVC CAMERA CONTROL SERIAL#
- #LINUX UVC CAMERA CONTROL DRIVERS#
- #LINUX UVC CAMERA CONTROL DRIVER#
- #LINUX UVC CAMERA CONTROL MANUAL#
Power line flicker compensation (Sensor ISP dependence).
#LINUX UVC CAMERA CONTROL MANUAL#
Manual White Balance control according to color temperature setting (Sensor ISP dependence).Automatic White Balance adjustment (Sensor ISP dependence).
#LINUX UVC CAMERA CONTROL SERIAL#
Supports customized parameters for UVC (USB Video Class) defined and Realtek proprietary functions from external serial EEPROM. Upgradeable firmware from external serial EEPROM to replace embedded firmware. 
#LINUX UVC CAMERA CONTROL SERIAL NUMBER#
Configurable VID (Vendor ID), PID (Product ID), and serial number from external serial EEPROM. Watchdog control for MCU reset and interrupt. On-the-fly configuration of I2C EEPROM through USB interface. 
64K bytes mask ROM code memory and 2.5K bytes SRAM data memory. Variable clock speed (15MHz/20MHz/24MHz) for performance and power saving. New sensors can be supported via upgraded firmware from an external I2C EEPROM. Note: The above sensors shown in bold type are default sensors supported by the RTS5803 and achieve good image quality without serial flash or EEPROM configuration. Supports SOC type (with ISP) of CMOS sensors up to 2 Mega Pixels. Programmable VSYNC and HSYNC timing and polarity to support various sensor. Wide range (2MHz to 96MHz, default 24MHz) and programmable system clock output for sensor. Supports standard 2-wire serial interface for sensor control. Supports 16 bits YUV (4:2:2) and 8-bit RAW input data format. Built in Self-Loop-Back BIST for testing purposes. End Point A: Video Streaming Isochronous IN endpoint with varying packaged size. Compatible with USB Video Class Specification Rev1.0 required for Windows XP, Vista, and 7. Compatible with USB Specification 2.0 Full-Speed and High-Speed transfer mode. LED indicator on video streaming through GPIO. Supports 2 GPIO (General Purpose Input/Output) pins with programmable driving strength. Selective suspend to minimize power consumption. Automatic frame rate adjustment when exposure is in low light environment. Adjustable and dynamic frame rate control on USB transaction. Built in 3.3V to 1.8V~3.1V adjustable regulator output for image sensor analog circuitry. Built in 3.3V to 1.8V regulator for internal core power. Software controlled connection to USB bus for re-enumeration. Upgradeable partial firmware and customized parameters through USB interface. On chip firmware default supports major sensors without external serial flash and EEPROM. Embedded 64K bytes ROM, 2.5Kbytes SRAM, 5K bytes ring Buffer. Supports I2C serial EEPROM interface for configuring customized parameters. On-chip high-performance and low-power MCU. #LINUX UVC CAMERA CONTROL DRIVER#
USB Video Class compatible, works with native driver in Microsoft Windows XP 32-bit/64-bit, VISTA 32-bit/64-bit, and Windows 7 systems. One 3.3V-to-1.8~3.1V adjustable regulator converts 3.3V power for the sensor’s analog parts, and 3.3V power to 1.8V core power for the RTS5803. The RTS5803 integrates two regulators to save BOM cost and PCB area. These functions are very useful to compensate intrinsic inaccuracy in lens and image sensor to get better image quality. In addition, RTS5803 supports color processing functions. UVC defined image processing functions are supported by using sensor’s ISP engine. This could ease the software developing work and shorten the prototyping schedule. The control firmware could be easily re-configured via a USB link. The RTS5803 supports both an internal MCU program ROM and an external NOR-Flash interface. The RTS5803 is designed to support various types of access interface to achieve the best compatibility with major SOC CMOS image sensors. It supports most available SOC CMOS sensors from VGA (640x480) to UXGA (1600x1200) resolution. The RTS5803 integrates a USB 2.0 transceiver that is optimized for high performance data transfer rate, high speed MCU (Micro Controller Unit), DC-to-DC regulators, sensor controller, color processing, and noise reduction into a single chip. #LINUX UVC CAMERA CONTROL DRIVERS#
It is fully compatible with the USB Video Class, and operates with native drivers provided in Windows XP, Windows Vista, and Windows 7 operating systems. The built-in extremely low-power transceiver provides superior compatibility with USB hosts and high quality for image applications. The RTS5803 is a USB 2.0 HS/FS and UVC compatible camera controller designed for notebook and desktop PCs.
0 kommentar(er)
